Thinklogical Velocitydvi System-3 A/V+ Quick Start Guide Manuel d'utilisateur télécharger pdf

PHONE: (800) 291-3211

WEBSITE: www.thinklogical.com

EMAIL: support@thinklogical.com

QUICK START GUIDE

All physical connections to the product use industry-standard connectors.

Visit us online at www.thinklogical.com for more product information, current updates

and the complete line of Thinklogical products.

Receiver

CPU

Power Supply

Digital Video Extension System -

Each of the Thinklogical™ DVI A/V+ Extender systems is designed for high resolution video and audio extension applications such as remote projection centers, theaters and assembly halls, and

for secure computer installations. It is now possible to position the monitor or projector in any setting from office to lecture hall to boardroom while keeping the computer secure in a remote,

controlled location.

The status LEDs near the USB port on the Tx and Rx units are

used to indicate the status of connections to the extender.

Tx Status LED

Green = Fiber L2 is connected and a good link is established.

Orange = Local Static Mode selected and no fiber link from Rx

to Tx (L2 is not connected) or both DDC mode buttons are held

down and the unit is waiting to reload the default DDC table.

Red Flashing = No Fiber Link from Rx to Tx (Not available in

Local Static mode.)

Rx Status LED

Green = Good Link and DVI device connected to primary port

(port on left in the diagram below).

Orange = No DVI device connected to primary port.

Red Flashing = No Fiber Link from Tx to Rx (L1 is not

connected).

LCL REM DDC MODE DESCRIPTION

REMOTE

DYNAMIC

REMOTE

STATIC

PASS-

THRU

LOCAL

STATIC

EDID READ FROM REMOTE DISPLAY

AND UPDATED EACH TIME REMOTE

DISPLAY CHANGES.

EDID READ FROM REMOTE DISPLAY

WHEN ACQUIRE BUTTON IS PRESSED.

ACTS AS A DIRECT CONNECTION

BETWEEN CPU AND DISPLAY. NO

EMULATION IS PERFORMED.

EDID READ FROM LOCAL DISPLAY

WHEN ACQUIRE BUTTON IS PRESSED.

Contents

Upon receiving your Thinklogical™

DVI Extender Transmitter

DVI Extender Receiver

DVI-D Male to DVI-D Male Cable,

1 Meter (CBL-000021-001MR)

DVI-D Male to DVI-D Male Cable,

2 Meter (CBL-000009-002MR)

Two CAT5 Cables, 7' (CBL-000001-007FR)

Two 3.5mm Audio Cables

(CBL-000016-006FR)

Modem Adpt. DB9M RJ45 (ADP-000019-R)

Modem Adpt. DB9F RJ45 (ADP-000025-R)

Two Universal AC Power Adapters

(PWR-000022-R)

DVI Extender Product Manual

STEP 4

Connect your fiber optic cable,

up to 1000 meters (available

through Thinklogical™)

between the Transmitter and

Receiver Units. Do not kink or

pinch the cable and be sure to

keep all bend radii to no less

than 3 inches.

STEP 3

Connect the supplied AC Power

Adapter (PWR-000022-R) to the

Receiver and plug it in to a

standard AC source.

STEP 1

Connect one end of a DVI-D Male to Male Cable to the primary viewing device. Connect the

other end of the cable to the Primary (left) Receiver DVI-D connector. A second device can also

be installed to the right- side, secondary port using a similar DVI-D Male to Male cable. If using

only one device, it must be connected to the Primary Port. Turn ON the DVI video device(s).

STEP 5: Connect the supplied AC

Power Adapter (PWR-000022-R) to

the Transmitter unit and plug it in to

a standard AC source.

Projector

Acquire Button

Used to initiate DDC collection. Works with all modes except

Pass-Thru. Must be pressed after switching between DDC

modes.

Select Button

Used to select the DDC mode. The modes will cycle through

Remote Dynamic, Remote Static, Pass-Thru and Local Static.

Both Buttons held 5 seconds

Holding both buttons for 5 seconds will reload the default DDC

table into the Tx and switch to Remote Static mode.

Fiber-optic

cable ports.

GND

Velocity

dvi

3 A/V+

OFF

GREEN

GREEN GREEN

GREEN

ORANGE

The Primary Port on the Rx is used for DDC. The Secondary

Port carries video data only.

Secondary

DVI Port

Primary DVI Port DDC

Optional Secondary DVI Port

Local Monitor

Power Supply

L1 L2

When lit, the solid green LED

indicates that power is applied.

Primary DVI Port DDC (Rx) Optional Secondary DVI Port (Rx)

Transmitter

Velocity

Digital Video Extension System – 3 A/V+

MRTS Technology

Transmitter

DVI from CPUDVI to Local Display

dvi

The Future of access and Control

L2 ► Data

L1 ◄ Video/Data

POWER

5 VDC

STATUS

DDC MODE

LCL REM

ACQUIRE

SELECT

MIC

OUT

LINE

SERIAL

Velocity

Digital Video Extension System – 3 A/V+

MRTS Technology

Receiver

DVI to DisplayDVI to Display DDC

dvi

The Future of access and Control

L1 ► Video/Data

L2 ◄ Data

◄ Line IN

Mic OUT ►

◄ Mic IN

Line OUT ►

STEP 2

Connect your Mic IN, Line OUT

and CAT5 Serial devices to the

appropriate Receiver ports.

Turn the devices ON.

STEP 7: Connect the Line IN and Mic OUT audio

cables and the CAT5 cable from the CPU to the

appropriate Transmitter ports. Ensure that all the

devices are turned on and all system functions are

operating properly.

CAT5

DVI-D Connector 1 DVI-D Connector 2

STEP 6

Connect one end of the

1 meter DVI-D Male to Male

Cable (CBL-000021-001MR) to the video source

(DVI-D video card). Connect the other end to the

transmitter DVI-D connector. A local display may

also be connected using the supplied 2 meter

DVI-D Male to Male Cable (CBL-000009-002MR).

L1 to L1 and L2 to L2 Optical Fibers (up to 1000 meters)

available with ST-, SC- or LC-type connectors

VELOCITY-3AV+_Quick_Start_Rev_B

Velocity 1

Résumé du contenu

Page 1 - Velocity

Plus de documents pour Systèmes de vidéosurveillance Thinklogical Velocitydvi System-3 A/V+ Quick Start Guide

Voir le document Thinklogical Velocitydvi System-3 A/V+ Quick Start Guide Manuel d'utilisateur

Thinklogical Velocitydvi System-3 A/V+ Quick Start Guide Manuel d'utilisateur (-1 pages)

Commentaires sur ces manuels

Pas de commentaire

Thinklogical Velocitydvi System-3 A/V+ Quick Start Guide Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Systèmes de vidéosurveillance Thinklogical Velocitydvi System-3 A/V+ Quick Start Guide. Thinklogical Velocitydvi System-3 A/V+ Quick Start Guide User Manual Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Systèmes de vidéosurveillance Thinklogical Velocitydvi System-3 A/V+ Quick Start Guide

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de vidéosurveillance Thinklogical Velocitydvi System-3 A/V+ Quick Start Guide