Thinklogical Camera Fiber-Link 6000 Quick Start Guide Manuel d'utilisateur télécharger pdf

QUICK START

GUIDE

PHONE: (800) 291-3211

WEBSITE: www.thinklogical.com

EMAIL: support@thinklogical.com

STEP 6: Using two of the MDR-26 Cables (CBL-000007-

002MR), connect the CPU’s frame grabbers to the Frame

Grabber Side Unit (Rx).

CFL-6000

Camera Fiber-Link

CAMERA 1

ERI AL

RIAL

FRAME

GRABB

The Camera Fiber-Link System-6000 from Thinklogical™ uses one or more Camera Side Units and a Frame Grabber Side Unit

interconnected by duplex, multi-mode fiber optic cables to allow Camera Link video support up to 500 meters (1640 feet) from the host

computer with no loss of signal or resolution and without the use of amplifiers or repeaters of any kind.

With industrial enhancements such as threaded screw-lock input connectors for standard 5V-12V input power, or for our 12V-24V input power

designed for rugged industrial environments, and our compact, light-weight design, the Camera Fiber-Link System is ideal for any application.

Visit our website at

www.thinklogical.com to see our complete line of Camera Fiber-Link and other fiber-optic extender products.

Multi-Mode Fiber models are available

with SC-, ST-, or LC-type connectors.

Single-Mode Fiber option models use

APC (Angled Physical Contact) SC-type

connectors.

To complement its line of Camera Fiber-

Link extenders, Thinklogical™ has also

developed high performance USB 2.0

and Firewire 800 Camera Extenders.

Please contact a Thinklogical™ sales

representative for details.

BLINKS when no camera is connected.

When you receive your Thinklogical™ CFL-6000

Camera Fiber-Link system, you should find the

following items:

Camera Fiber-Link (CFL-3000 Camera Side) Transmitter – Qty 2

Camera Fiber-Link (CFL-6000 Frame Grabber Side) Receiver

AC Power Supply – Qty 3 (Standard or Industrial Option)

MDR-26 Cable, 2 Meters (CBL-000007-002MR) – Qty 4

Camera Fiber-Link Adapter/Cable Kit (KIT-000013-R) – Qty 1

When lit, the green LED

indicates that power is applied.

Fiber-optic cable

ports.

GND

Serial Port

(RJ45) with

RS-232

interface

STEP 8: Open your

frame grabber

application. Verify that

all system features

are functioning

properly.

STEP 5: Connect the

standard, multi-mode fiber

optic cables between the

Frame Grabber Side unit and the

two Camera Side units (up to 500

meters). Be sure not to kink or

pinch the cables and keep all bend

radii to no less than 3 inches.

STEP 7: Connect one of the standard 5V-12V power

supplies (PWR-000022-R) to the Frame Grabber Side Unit

(Rx) and plug it into a standard AC source. If the unit is the

industrial option, use the supplied 12V-24V power supply

(PWR-000033-R).

CAT5 cable

3 meters – Qty 2

Supports one dual base Frame Grabber or two individual Frame Grabbers with a pixel clock of 20-85MHz.

BASE 1

FRAME

GRABBER

BASE 2

Red LED is ON with no signal and

DB9M to RJ45F DB9F to RJ45F

Camera 1

Dig

ital

mer

Extension System CFL- 6000

HI-SPEED

BAS

FRAME GRABBER SIDE

DUAL

CAMERA FIBER-LINK

MRTS Technology

CAMERA FIBER-LINK

Digi

al Camera

Extension System CFL- 3000

CAMERA SIDE

HI-SPEED BASE

MRT

Tech

logy

Camera 2

CAMERA 1

ERI A

CAMERA FIBER-LINK

Digi

al Camera

Extension System CFL- 3000

CAMERA SIDE

HI-SPEED BAS

MRT

Tech

logy

STEP 3: (Optional) If using external sensors, lighting, etc.,

two CAT5 cables and RJ45 to DB9M and DB9F adapters

(KIT-000013-R) are included to connect your serial device(s)

to the Camera Side and Frame Grabber Side units.

STEP 2: Using two of the MDR-26 Cables (CBL-000007-002MR), connect Cameras 1 and 2 to the Camera Side Units (Tx)

1 and 2, then turn the cameras on.

CAMERA 2

L1 ►

L2 ◄

CAMERA 1

Camera Side Unit 2

Camera Side Unit 1

CPU

STEP 4: Connect one of the standard 5V-12V power supplies

(PWR-000022-R) to each of the two Camera Side Units (Tx) and

plug them into a standard AC source. If the unit is the industrial

option, use the supplied 12V-24V power supply (PWR-000033-R).

Visit us online at www.thinklogical.com for more product information, current updates and the

complete line of Thinklogical products.

Camera Fiber-Link Sample Rate:

Communications from Camera to Frame Grabber, SerTFG-

Communications from Frame Grabber to Camera, SerTC-

Camera Control 1 (CC1), Camera Control 2 (CC2), Camera Control 3 (CC3), Camera Control 4 (CC4)

Serial Port Communications s

Local

Camera

Display 2

Local

Camera

Display 1

STEP 1: Check the contents to ensure

that you’ve received all the items

included with your system.

CFL-6000_Quick_Start_Rev_C

2 2

C A M E R A

L2 ◄

L1 ►

L1◄

L2 ►

L1◄

L2 ►

Hi-Speed Base

C A M E R A

Upper Connector Lower Connector

®®

The Future of Access and Control

CFL-6000 1

Résumé du contenu

Page 1 - CFL-6000

QUICK START GUIDEPHONE: (800) 291-3211WEBSITE: www.thinklogical.comEMAIL: [email protected] 6: Using two of the MDR-26 Cables (CBL-000007

Commentaires sur ces manuels

Pas de commentaire

Thinklogical Camera Fiber-Link 6000 Quick Start Guide Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Systèmes de vidéosurveillance Thinklogical Camera Fiber-Link 6000 Quick Start Guide. Thinklogical Camera Fiber-Link 6000 Quick Start Guide User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de vidéosurveillance Thinklogical Camera Fiber-Link 6000 Quick Start Guide