Thinklogical HDX576 SDIXtreme 3G+ ImageEvolution X3 Quick Start Manuel d'utilisateur télécharger pdf

2 3 4

1 2 3 4 5 6 7

Users’

Menu:

Display

Parameters

2 3 4

1 2 3 4 5 6 7

2 3 4

1 2 3 4 5 6 7

To Receive Port

From

Transmit Port

To Receive Port

From Transmit Port

RS422

SDI Link

Inputs:

Single- or Dual-

Link

SDI Loop Out 1

(Local Monitor)

SDI Loop Out 2

(Dual-Link Only)

To Sync Reference IN

CPU

RS422

SDI Inputs: Single- (shown) or Dual-Link

SDI Outputs: Single- or Dual-Link

SDI Source

SDI Loop Out (Local Monitor)

+5V IN

SDI Output 1 SDI Output 2

Machine

Controller

SDIXtreme

3G+

SDIXtreme

Transmitter

3G+

QUICK-START GUIDE

POWER SUPPLY 1 (LEFT):

POWER SUPPLY 2:

POWER SUPPLY 3:

POWER SUPPLY 4 (RIGHT):

FANS:

TEMPERATURE WARNING:

TEMPERATURE SHUTDOWN:

CPU:

INPUT/OUTPUT CARDS:

ANY OF THE ABOVE

COMMON

GROUND

The HDX576 Router Critical Hardware Alarms: (Located at the top, left rear of the unit.)

Fan failure, temperature spikes, DC voltage and/or current out of range, AC power input interruption or module removed

Individual fan monitoring

Chassis over temperature, multiple sensors

Chassis over temperature causing shutdown

Card failure (Only with a redundant card)

SFP+ failure, laser output fault

HDX576_SDIXtreme3G+_ImageEvolution_QSG_Rev_A

Fan failure, temperature spikes, DC voltage and/or current out of range, AC power input interruption or module removed

PHONE: 1-800-291-3211

WEBSITE: www.thinklogical.com

EMAIL: [email protected]

Visit us online at www.thinklogical.com for more product information,

current updates and the complete line of Thinklogical™ products.

HDX576

router

As used with the SDIXtreme and the Image EvolutionX3

3G+

STEP 1 (Fiber-Optic Cables): Connect

your SDIXtreme 3G+ Receiver to the HDX576 using

multi-mode fiber-optic cables (up to 1000 meters).

Connect the Receiver’s Fiber IN to the Transmit

Port on any SFP of the Upper Card Cage. If using

RS422, a second, back-channel Fiber OUT to the

Transmitter is required and should be connected to

the same numbered Upper Cage Receive Port.

STEP 1 (75Ω Coax Cables): Connect your Single- or Dual-Link SDI device(s) to the

HDX576 using 75Ω Coax Cables terminated with BNC and DIN 1.0/2.3 connectors.

Connect each DIN 1.0/2.3 connector to the Transmit Port on any SFP in the Coaxial

I/O Modules of the Lower Card Cage and connect the BNC connectors to your SDI

input device(s). Turn the SDI Device(s) ON.

STEP 3: Install your HD, SD or 3G SDI

destination devices to the SDIXtreme

3G+ Receiver’s OUT Ports. If using

RS422, connect your device to the

Receiver’s RS422 port (located directly

below the Power Connector).

STEP 2: Install the

provided +5VDC power

supply into the SDIXtreme

3G+ Receiver and plug it

into a standard AC source.

Ensure that the Receiver’s

ACTIVE LED comes on.

STEP 4: Connect your SDIXtreme 3G+ Transmitter to the HDX576

using multi-mode fiber optic cables. Connect the Transmitter’s

Fiber OUT to the Receive Port on any SFP of the Upper Card Cage.

If using RS422, a second, back-channel Fiber IN to the Transmitter

is required and should be connected to the same numbered Upper

Card Cage Transmit Port.

STEP 5: Install the provided +5VDC power supply into the

SDIXtreme 3G+ Transmitter and plug it into a standard AC source.

Ensure that the ACTIVE LED on the Transmitter comes on. The

ACTIVE LED will blink if no SDI input is present.

STEP 6: Connect your 3G, SD or HD SDI video source to the

SDIXtreme 3G+ Transmitter’s IN Port. A local Monitor or other

viewing device may be connected to the Transmitter’s LOOP OUT

port. If required, connect the Video Source’s RS422 port to the

Transmitter’s RS422 Port, located directly below the Power

connector.

STEP 7: Ensure that the 3G, SD or HD LEDs are illuminated

(depending on your signal type). These indicate that the connections

are sound. Go to STEP 8.

STEP 2: Connect your SDI Link 1 & Link 2 Outputs to the HDX576 using 75Ω Coax

Cables terminated with BNC and DIN 1.0/2.3 connectors. Connect each DIN 1.0/2.3

connector to the Receive Port on any SFP in the Coaxial I/O Modules of the Lower

Card Cage.

STEP 3: Install the provided AC power

cord into the Image EvolutionX3 and

plug it into a standard AC source. Turn

the Power Switch ON.

STEP 4: Using BNC Cables, connect your SDI devices to the SDI Loop OUT and SDI Link IN ports on the Image EvolutionX3

backpanel and turn the devices ON. Connect GENLOCK IN to SYNC REF IN on the HDX576. The SYNC REF LOOP OUT

can be connected to any other synchronized device.

STEP 5: Using an RS422 Serial Cable, connect your CPU to the Image EvolutionX3 backpanel. Using a standard DVI Cable,

connect a local viewing device to the CPU. Turn both devices and the CPU ON. Go to STEP 8.

DVI

STEP 9: Install the provided AC

power cords into the HDX576

Power Supplies and plug them

into a standard AC source.

Ensure all system functions

are operating properly.

BNC connector

75Ω Coax Cable

HDX576

router

Extend Distribute Innovate

From Transmit Ports

To Receive Ports

26RU, 1700W

(fully loaded)

Receiver

Sync Reference

Loop Out

External Control CPU

Network

Hub

STEP 8: Connect the Controller

Cards’ LAN Ports to your

Controller CPU with CAT5 cables.

(CPU IP address: 192.168.13.9)

Optional

Secondary

Controller Card

IP address:

192.168.13.116

Primary Controller

Card IP Address:

192.168.13.115

DIN 1.0/2.3 or

HD-BNC connector

Coaxial SFP

QUICK-START GUIDE 1

Résumé du contenu

Page 1 - QUICK-START GUIDE

12 3 41 2 3 4 5 6 7Users’ Menu: Display Parameters12 3 41

Commentaires sur ces manuels

Pas de commentaire

Thinklogical HDX576 SDIXtreme 3G+ ImageEvolution X3 Quick Start Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Systèmes de vidéosurveillance Thinklogical HDX576 SDIXtreme 3G+ ImageEvolution X3 Quick Start. Thinklogical HDX576 SDIXtreme 3G+ ImageEvolution X3 Quick Start Guide User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de vidéosurveillance Thinklogical HDX576 SDIXtreme 3G+ ImageEvolution X3 Quick Start