Thinklogical Configuring the TLX ASCII Interface Manuel d'utilisateur télécharger pdf (Page 10)

Configuring the TLX ASCII Interface 7 Rev. A - July, 2015

Using ‘PuTTY’ to Communicate to the API

Upon opening PuTTY (a Windows communication program) to communicate to a switch, you

must first set the following:

1. Under ‘Category,’ click on Session

2. Under ‘Connection type,’ select 'Raw' mode

3. Change the port to 17567

4. Under ‘Category,’ click on Terminal

5. Under ‘Set various terminal options,’ check the 'Implicit CR in every LF' box.

6. Click Open.

You may also use telnet to access the ASCII control port. The command syntax is:

telnet IPaddress 17567

Replace IPaddress with the actual IP address of the switch.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Pas de commentaire

Thinklogical Configuring the TLX ASCII Interface Manuel d'utilisateur Page 10